Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The initial validation type checks that your RTO's assessments align with the training package requirements.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.
A Look at the Two Types of Assessment Validation
An Introduction to Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
How Assessment Tool Validation is Conducted
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
Appropriate Times for Assessment Tool Validation
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- your resources get updated
- adding new training products on scope
- training product updates are reviewed against your course
- your risk assessment includes identifying your learning resources as a risk
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
Which Training Products to Validate?
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
What Do You Need for Assessment Tool Validation?
Educational Materials
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Team for Validation
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
As a group, your validation panel must possess:
Vocational competencies and current industry skills applicable to the unit being validated
Recent knowledge and skills in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its future version
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student get more info use.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Key Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?
Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and modern industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Act on Your Words
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
changing diapers
prepare bottles, feed infants from bottles, and clean equipment
solid food prep and feeding babies
respond suitably to infant signs and cues
prepare and settle infants for sleep
monitor and encourage suitable physical exploration and gross motor skills for the age
Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.
All or No Competence
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What types of information can be included in a work package?
Answers might include:
Required materials
Associated costs
Time allocated for activities
Appointed roles and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering, administration
Equipment or machinery – isolation, engineering, administration
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.